top of page

Axion Rotary Interface

Lateral rotation for your headrest.

Gradient Line
Rotating Wheelchair Headrest
Rotating Wheelchair Headrest
Rotating Wheelchair Headrest
Rotating Wheelchair Headrest animation

The Axion Rotary Interface for Wheelchair Headrests can be attached to most headrests and hardware.  It allows headrests to freely rotate, improving the function of the user and reducing shearing on the rear of the head.  Compatible with the Savant Head Positioning, Apex Headrest Pads and other manufacturers.

The Axion is available in three versions, to fit two sizes of balls 1" (25mm),  3/4" (19mm) and to fit Snug Seat (R82) hardware and headrests.

 

Each version is available for 60 or 90 degrees of rotation.

Gradient Line
Rotating Wheelchair Headrest video

How it works

​

The Axion comprises of the base housing, curved rail and ball on a stem. The Axion is an interface mounted between the headrest pad and the headrest mounting hardware. 

​

The rail rotates through the base and with the headrest. The base remains stationary.  The knob underneath permits locking out the rotation and can be engaged at any position on the rail. 

 

There are two rotation ranges, 90 or 60 degrees. 

The Axion-90 rail is longer than the Axion-60 rail. This longer rail may project beyond the edge of smaller headrests.  If in doubt, choose the Axion-60 series.

 

The rotation is 30° each way for the Axion-60 and 45° each way for the Axion-90.

Gradient Line

Sizing

Axion Sizing
Rotating Wheelchair Headrest

The Axion is available in six versions, to fit two sizes of balls, the Snug Seat (R82) hardware and two ranges of rotation.

 

Axion 6019 and Axion 9019 - fit a 19mm (3/4") ball

Axion 6025 and Axion 9025 - fit a 25mm (1") ball

Axion 60R82 &  Axion 90R82 - fit the Snug Seat (R82) hardware

 

(19mm fits Whitmyer headrests & hardware, 25 mm fits Savant and APEX)

 

Axion-60 series permits a total rotation of 60 degrees

Axion-90 series permits a total rotation of 90 degrees

Gradient Line
Axion Installation

Installation

Exploded view of parts that are part of an Axion Rotary Interface headrest setup

The Axion is fitted between the wheelchair headrest and the hardware.

Move the Axion fully left or right to access holes in mounting collar.

Constructed view of Axion rotary interface and headrest

Once fully rated left or right, you will be able to attach the headrest to the ball of the Axion.

WARNING: NEVER REMOVE THE BALL TO MOUNT THE HEADREST

Axion with larger headrest mounted

Mount the Axion to the headrest hardware.

Person with their head resting in a head rest mounted on an Axion rotary interface

Attach the mounted Axion to the hardware on the wheelchair.

Person with their head turned away resting in a head rest mounted on an Axion rotary interface

The headrest should follow the head freely as it rotates.

Person with their head resting in a Savant head rest mounted on an Axion rotary interface

The Axion may be used on a wide variety of headrests, including Stealth, Whitmyer, Netti and Ottobock.

bottom of page